AQSBVS01 -- Leak Protection Kit "BASIC" for Ball Valves
Product Description
The system monitors the water pipes of a building, automatically shuts off the water in case of leaks, and notifies the residents via radio. It consists of two main components:
- Monitor: Acoustic water sensor for permanent monitoring of the entire pipe network. The sensor is connected via a T-piece at any accessible point on the domestic water supply line.
- Motor drive: Mounted on the ball valve -- without interrupting the water supply and without pipe cutting. When a leak is detected, the water is automatically shut off.
Key Features:
- Pipe-Check detects micro-leaks from 4 ml/h during regular pipe tests
- Control via app command or programmable timer (e.g., shut-off on weekends)
- Mobile app control
- MQTT server integration
- HTTP webhook for smart home integration
- LoRa radio technology for communication across multiple floors and through basements
Included Products
| Product | Description |
|---|---|
| AQXWIE02 | Leak Protection & Water Consumption Monitor (Wi-Fi) |
| BVSLWE02 | Retrofit Motor for Ball Valve (LoRa P2P) |
Installation
Monitor (AQXWIE02)
Please refer to the AQXWIE02 manual for further information on how the leak monitor is installed and connected to the app.
See AQXWIE02 -- Manual.
Motor Drive (BVSLWE02)
Please refer to the BVSLWE02 manual for further information on how the motor drive is installed on the ball valve and operated.
See BVSLWE02 -- Manual.
Package Contents
Motor (BVSLWE02)
- Motor with connection cable
- Wired water sensor (flood sensor pad)
- 12 V power supply
Monitor (AQXWIE02)
- Leak protection monitor (main device, without battery)
- Aqua-Scope sensor head with 80 cm cable
- 3/8" T-piece for angle valve installation
- Flood sensor with 130 cm cable and jack plug
- USB-C power cable and power supply
- 19 mm wrench for T-piece installation